Green Stickman™'s

To format SAGEM EFT930S POS Terminal we have to do the following:

1. Restart the terminal by pressing the correction button (yellow button) and “.” button simultaneously
2. Press the F1 Button. When the asterisk (*) symbol appeared on the screen, then press F4, F2, and F3 (There should be 4 asterisks that would be displayed on screen)
3. These asterisks will then be changed to letters LLT
4. Using the LLT application, connect the terminal in your test PC
5. In the terminal’s view, select all the files and “Delete” these files (LLT will prompt you that some other files cannot be deleted.)
   
   
   
6. In your computer’s view (center view of LLT), look inside the folder where you installed the Telium SDK (In my case it is in C:\Program Files\SDK30\TDS 6.5.3\. Then go to Component\OS folder. From there you will see several m31 files. If you the terminal is for MOCK-UP, upload the EFT930_DIR_MOCKUP.M31 and if it is for production, upload the file EFT930_DIR_PROD.M31
7. When uploading is finished, “Disconnect” the terminal. The terminal will reboot and returns to LLT mode
8. “Connect” the terminal again, but this time, look for the \Component\Manager folder. In this folder, there are 4 flavors to choose from: EFT930_export_PROD.M31, EFT930_health_PROD.M31,EFT930_interne_PROD.M31, and EFT930_spain_PROD.M31. In our case, we usually select interne or export. Upload the selected telium manager by dragging the file.
9. Disconnect the terminal. When the terminal reboots, it will ask for several parameters (if the application will be using GPRS radio, do not forget to select GPRS to AUTO and fill up the APN)
10. When loading of manager is finished, the terminal will reboot again but this time the words “LOAD APPLICATION” will be displayed on screen
11. Before loading the your application, do not forget to upload the FTP (\Component\DLL_FTP), Fonts (\Component\Fonts),and Link Layer (\Component\LinkLayer\WithIP),

That’s it! The SAGEM EFT930s is formatted successfully!

You can also read the following Green Stickman™‘s related articles:
- Getting started with Sagem EFT930s
- SAGEM EFT930s

---

Is this post helpful? If it does, please help me to publish quality articles like this. Send some donation to keep this website alive by clicking the button below: Be a Green Stickman™ fan. Click my Facebook "like" Button Here:
To all the people who clicked the "LIKE" button of my Fan Page, THANK YOU VERY MUCH! :D

As I have mentioned, SAGEM EFT930S POS Terminal uses its own SDK in making program applications. The SDK is called Telium SDK.

In order to program and work with this device, you should have the following installed in your PC:

• Telium SDK (19.38MB)
• LLT Application(7.68MB)
• GCC Compiler (13.21MB)
• Microsoft Visual Express (85.39MB)

Please take note, that it is better if you use Windows XP as your OS.  If you are using other Operating System, I am afraid you will encounter lots of errors because of the advanced security features of these Operating Systems.

The following should be noted when installing the Telium SDK:

1. Install the Pack_SDK_Telium_*.*.* setup.exe (I am using 6.5.3). Click here if you want a copy of Telium SDK 6.5.3 and want to try.
2. Install the GCC Compiler (I am using version 3.4.3) in your root directory
3. Install the Local Loading Tool : LLT_setup V3.1
4. Install the Microsoft Visual Express. If you want to download my copy, its in DAA file format so you will be needing another tool called POWERISO46 to extract and install the file (You have to mount the DAA file and act like a virtual disc).
5. Attach the USB cable in the left side of terminal (second mini-usb port).
6. Open the LLT (Local Loading Tool) Application
7. Install the driver for SAGEM Monatel using the Telium-USB driver
8. Configure the Connection by selecting the “Serial Interface Properties” in Connection tab.
9. Select the port to be use by going to LLT Connection Properties. Select the COM port number. In my case I am using COM3 so “Communication cable between two computers #3(COM3)” is displayed.
10. Test if the terminal (EFT930s) can connect on your PC by pressing the “yellow” button and “dot” button simultaneously. Then press and hold the “up” button of navigation key. An LLT message will be displayed on screen.
11. Connect on your PC by pressing F4 or click the Connect button in the LLT.
12. You can upload files to terminal by dragging the file from center (your PC’s root directory) to right (terminal root directory).
13. Disconnect by pressing CTRL + F4 or click the Disconnect button in the LLT.

Well, that’s it! the device is configured and you are ready to make a program with this device. I will be posting articles on how to program this device and probably share my “program codes”.

You can also read the following Green Stickman™‘s related articles:
- Reformatting the OS of Sagem EFT930s
- SAGEM EFT930s

---

Is this post helpful? If it does, please help me to publish quality articles like this. Send some donation to keep this website alive by clicking the button below: Be a Green Stickman™ fan. Click my Facebook "like" Button Here:
To all the people who clicked the "LIKE" button of my Fan Page, THANK YOU VERY MUCH! :D